Видео

thank you im gonna check mine now

I have same situation with egolf lithium cells. Any ideas how to revive them? Some sit on 1.2v

How do you still feel about?

Actually prefer these smaller one. Stepped down from a larger generator to the Wen 4000. It meets the advertised 7 hours on 2 gallons. Not so much saving money, just don't like to store that much fuel.

Pure Gold!🤩

Wen is a great brand. They are a US company that has been around since the 60's. They may use Chinese sourced parts in some products, but they do their due diligence and design most of their products in-house. No different than Apple or whatever other company that sources labor and parts from other countries but designs it in-house. I find it odd that so many people think Wen itself is a Chinese company. I guess because they make affordable products and the name sounds Chinese? Funny thing is, most of the competing "premium" brand products use the same sourcing tactics. Champion for example which is kind of a premium generator brand-name actually makes almost identical generators to some of Wen's models. Same engines and all. but you pay a premium for them for some reason. These Wen generators are a fantastic deal.

I know this is a old video. Could i get a few reference dimensions on the dresser attachment parts ? diameter, length etc. Looking to make my own set. thanks. feel free to contact me through my email in my profile

Measure the blade retention pin to the blade hole, my pin is 6mm, blade holes are 5mm, I’m left with a paper weight.

I find it funny I can ID the older ones from new by that bluish tinge the edges have

Does the inner wheel bearing need to have movement up and down or does it sit without movement beside round

Hi, what is the Sta-Bil that you added to the gas? Is it the 360 Protection Ethanol Treatment and Stabilizer? Do you add Sta-Bil every time you refuel the gas or only the first time running the generator? And about the Lucas break-in oil, after the engine is broken in, do you still use this oil or do you change to a different oil? If change to a different oil, what brand and type of oil? And how many hours do you need to run to consider that the engine is broken-in? thank you.

Hi I just bought one brand new. Do I need to break in the engine? What kind of oil should I use. What brand and type of oil? Also, should I use regular gas or premium gas? Thank you

how's the quality and performance of this generator after 2 years? Any issues?

how to do you know when gas is running low?

Got mine together. Skookum as frig. I am going to peen the screws over once I make sure I don't need to take it apart again.

Awesome no nonsense review. Looking at the HD model with Koehler engine. $ 9000 ish

I have a generator with this engine. So confused on how to wire it

I don’t know why they would pack the hub with grease on this trailer. Pack the bearings and shoot a few pumps of grease in. If it was a boat trailer submerged in water then u would want the grease pressure to keep water out. Had a quad trailer and bearings were still good from factory after ten years. Boat trailers I Repack every season

You can relube using the fitting if done right. They must have used a power grease gun or air and or not rotated tires. Great video and insight though. Always good to inspect and do manually

Are you still happy with the Maverick and any issues with it ? Thinking very hard about the 2024 Maverick HD for $7900 !

I have something similar but batteries show full voltage..problem is on load they turn from 78 volts to 62 volts...wondering if any recommended method to get them refreshed and regain their power. I have a professional hf7 charger 72 volts 30 amps if that helps. Thanks

Mine dies when I put a load on while in eco mode but can handle load fine in eco off mode. Switch seems to work as it idle up and back down with no load when I witch it back and forth?

What a professional tractor operator !!!!!

😒

Had blown seals on my 5200lbs dextar axles, right front left rear, glad i did it and never using the zerk

Love my Maverick. I mow 8 acres of field and keep it looking good. Cuts everything in my field and small trees on the edge.

Because china pays 2 dollars a day. But we are the oppressors in the world. Ya, ok democrats.

Completely filling the whole hub full of grease is not good for any axle style. Spinning the wheel during greaseing will not blow the seal out nor push it out. Too much grease in the hub so full and leaving no pocket of air space for grease exspansion is what will push a seal or actually rip the rubber apart. This happens in vehicle axle housings where the housing breather gets plugged. Just plain do NOT fill axle hub full of grease and do not leave "end play" as so many so called repair suggestions state. Leaving end play allows the weight that is being supported by the bearing to concentrate on fewer bearing rollers. No end play assures weight is distributed more evenly among more rollers due to the tapered design of the roller style bearings. After packing bearings for 54 years and having NO bearing failures due to no so called necessary end play. ALL trailer axles come out with excessive free play and not enough grease. Guess what? Bearing failure! None of my trailers have bearing failure even after twenty five years.

Misleading name to the video.

Misleading name to the video.

Did you prepare the Fetzer valve with some 3-in-1 oil and some gauze pads? If that doesn't do it I'd check the bypass line. 😀

Anyone know where to buy a generator head like the one here? Looking for 4 pole, 1800 rpm head in the 3-4kw range

Well done, James (AZ Expert) would be proud :) Bye now, I'm off to the store to buy a grinder!

PYREX = good and pyrex = cheap

Amazing hammer control that guy has

Thank you

Noel, are you selling this one?

Gravely zt HD has 3100

Need a top gasket for this

They’re called ‘pads’ when it’s a disk break system (with rotors and calipers), those are shoes and trust me, I may be a girl but we know our shoes 🤣

The Wen looks identical to Champion!

Look at my phone, not the teacher. Brilliant!

I have a 2020 60” elite with electric deck lift. Once I worked out the bugs in it it’s been great.

very good informative video!! this is my next project, where did you buy all the parts/did ya shop around? did you call lippert to get all the part#'s first?? thanks for any response in advance 🤠

Thats datura

Can you add the link for the ngk spark plug?

Great! video. Still waiting for my Wen to get here. For the 1st three oil changes, are you using the break in oil each time? at what point in running time and metal free results do you start using synthetic oil? Thanks

I bought one second hand. It looks like the original one you showed and says oven and microwave safe but the font looks like the fake one so I’m conflicted.

I never lube the Ez lube. What is the point of filling up the center of the hub, and risk blowing a seal which is what we found when we bought our trailer used. Now, yearly we inspect, then pack inner and outer bearing bearings replace seals adjust brakes and we are good to go.

Noel. Thanks so much for putting this together. I just set mine up and watching your video along with the process was a great help. Appreciate it big time!